Synthesis of 1-Aza-8-thiabicyclo[4.2.1]nona-2,4-diene 8,8-dioxide and its conversion to a strained spirocycle via photoinduced SO2-N bond cleavage

A route to the doubly unsaturated bridgehead sultam 12 has been developed. When irradiated at 350 nm, this conjugated diene is isomerized via a two-photon process to the structurally novel spiro heterocycle 17 constituted of cyclobutene, thietane dioxide, and pyrrolidine rings. A probable mechanism for the generation of 17 and select reactions thereof are reported. [reaction: see text]     

A case of highly diastereoselective addition to unsymmetrical ketones: lk-addition of (2-alkenyl)triphenoxytitanium derivatives

(2-Butenyl)-, (4-methyl-2-pentenyl)-, and (2-heptenyl)triphenoxytitanium ( 2a – c ) add to dialkyl, alkyl aryl-, and alkinyl aryl ketones to give high yields of tertiary homoallylic alcohols ( 5 – 12 ), which are diastereomerically enriched up to 98%. Configurational assignment by degradation of two of the products to olefins 15 and 18 - through β-hydroxy acids 13 and 16 and β-lactones 14 and 17 - leads to the proposal of a general mechanism and of a specification of the relative topicity lk of the process (Scheme 5). The allylic Ti-compounds 2 can serve as d²-reagents (see the d²-synthon II and the aldol-type structures 1 ).     

Exploratory studies aimed at a synthesis of vinigrol. 3. Evaluation of a lactone bridge as a conformational lock

Evaluated in the present investigation are possible synthetic approaches to vinigrol based on the involvement of lactone rings as tools for the conformational rigidification of functionalized cis-octalins. Emphasis was placed on the structural arrangements resident in 3 and 5. The first of these systems proved to be highly strained and inaccessible. Especially notable was the finding that hydroxy ketenes 14 and 21 could be isolated and shown not to be amenable to cyclization when heated. The stereo-controlled assembly of 5 was successfully accomplished through exploitation of a related synthetic pathway. However, neither this attractive intermediate nor its close relative 33 could be processed in a manner that delivered the vinigrol framework. Nonetheless, several features of the routes deployed offer the prospect of wider application in other contexts.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.     

Location of saddle points and minimum energy paths by a constrained simplex optimization procedure

Two methods are proposed, one for the location of saddle points and one for the calculation of steepest-descent paths on multidimensional surfaces. Both methods are based on a constrained simplex optimization technique that avoids the evaluation of gradients or second derivative matrices. Three chemical reactions of increasing structural complexity are studied within the PRDDO SCF approximation. Predicted properties of reaction hypersurfaces are in good overall agreement with those determined by gradient minimization and gradient following algorithms in connection with various ab initio SCF methods. Computational efforts required by the new procedures are discussed.     

Quinazolines and 1,4-benzodiazepines. XLVI. Photochemistry of nitrones and oxaziridines

The cyclic nitrones 7-chloro-1,3-dihydro-5-phenyl-2H-1,4-benzodiazepin-2-one 4-oxide ( 5a ) and 1,3-dihydro-7-methylthio-5-phenyl-2H-1,4-benzodiazepin-2-one 4-oxide ( 5b ) are photoisomerized to readily isolable oxaziridines, 7-chloro-4,5-epoxy-5-phenyl-1,3,4–5-tetrahydro-2H-1,4-benzodiazepin-2-one ( 6a ) and 4,5-epoxy-5-phenyl-1,3,4,5-tetrahydro-7-methylthio-2H-1,4-benzo-diazepin-2-one ( 6b ). Oxaziridine 6b upon further irradiation gave ring expansion and ring contraction products, 4,6-dihydro-2-phenyl-9-methylthio-5H-1,3,6-benzoxadiazocin-5-one ( 7b ) and 4-benzoyl-3,4-dihydro-6-methylthioquinoxalin-2(1H)-one ( 8b ) respectively. The ring contraction product, 4-benzoyl-6-chloro-3,4-dihydroquinoxalin-2(1H)-one ( 8a ), was obtained from irradiation of oxaziridine 6a .     

Mitteilungen aus chemischen Gesellschaften

Ohne Zusammenfassung     

Synthesis and reactivity of silyl ruthenium complexes: the importance of trans effects in C-H activation,Si-C bond formation,and dehydrogenative coupling of silanes

A series of octahedral ruthenium silyl hydride complexes, cis-(PMe(3))(4)Ru(SiR(3))H (SiR(3) = SiMe(3), 1a; SiMe(2)CH(2)SiMe(3), 1b; SiEt(3), 1c; SiMe(2)H, 1d), has been synthesized by the reaction of hydrosilanes with (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5), cis-(PMe(3))(4)RuMe(2) (6), or (PMe(3))(4)RuH(2) (9). Reaction with 6 proceeds via an intermediate product, cis-(PMe(3))(4)Ru(SiR(3))Me (SiR(3) = SiMe(3), 7a; SiMe(2)CH(2)SiMe(3), 7b). Alternatively, 1 and 7 have been synthesized via a fast hydrosilane exchange with another cis-(PMe(3))(4)Ru(SiR(3))H or cis-(PMe(3))(4)Ru(SiR(3))Me, which occurs at a rate approaching the NMR time scale. Compounds 1a, 1b, 1d, and 7a adopt octahedral geometries in solution and the solid state with mutually cis silyl and hydride (or silyl and methyl) ligands. The longest Ru-P distance within a complex is always trans to Si, reflecting the strong trans influence of silicon. The aptitude of phosphine dissociation in these complexes has been probed in reactions of 1a, 1c, and 7a with PMe(3)-d(9) and CO. The dissociation is regioselective in the position trans to a silyl ligand (trans effect of Si), and the rate approaches the NMR time scale. A slower secondary process introduces PMe(3)-d(9) and CO in the other octahedral positions, most likely via nondissociative isomerization. The trans effect and trans influence in 7a are so strong that an equilibrium concentration of dissociated phosphine is detectable (approximately 5%) in solution of pure 7a. Compounds 1a-c also react with dihydrogen via regioselective dissociation of phosphine from the site trans to Si, but the final product, fac-(PMe(3))(3)Ru(SiR(3))H(3) (SiR(3) = SiMe(3), 4a; SiMe(2)CH(2)SiMe(3), 4b; SiEt(3), 4c), features hydrides cis to Si. Alternatively, 4a-c have been synthesized by photolysis of (PMe(3))(4)RuH(2) in the presence of a hydrosilane or by exchange of fac-(PMe(3))(3)Ru(SiR(3))H(3) with another HSiR(3). The reverse manifold - HH elimination from 4a and trapping with PMe(3) or PMe(3)-d(9) - is also regioselective (1a-d(9)() is predominantly produced with PMe(3)-d(9) trans to Si), but is very unfavorable. At 70 degrees C, a slower but irreversible SiH elimination also occurs and furnishes (PMe(3))(4)RuH(2). The structure of 4a exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si...HRu interactions are not indicated in the structure or by IR, the HSi distances (2.13-2.23(5) A) suggest some degree of nonclassical SiH bonding in the H(3)SiR(3) fragment. Thermolysis of 1a in C(6)D(6) at 45-55 degrees C leads to an intermolecular CD activation of C(6)D(6). Extensive H/D exchange into the hydride, SiMe(3), and PMe(3) ligands is observed, followed by much slower formation of cis-(PMe(3))(4)Ru(D)(Ph-d(5)). In an even slower intramolecular CH activation process, (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5) is also produced. The structure of intermediates, mechanisms, and aptitudes for PMe(3) dissociation and addition/elimination of H-H, Si-H, C-Si, and C-H bonds in these systems are discussed with a special emphasis on the trans effect and trans influence of silicon and ramifications for SiC coupling catalysis.     

The formation of mixed ligand complexes by metal chelates and some buffer components

A method for the determination of the stability constants of mixed ligand Complexes of metals is described. The influence of the buffer components ammonia (NH₃), imidazole (Im)and hexamethylenetetramine (U) on the murcury (II)-TTHA system was investigated. The binuclear mercury (II)-TTHA chelate has a strong tendancy to coordinate two additional ligands. The following stability constants of mixed ligand chelates were determined:

. Potentiometric titrations were performed to check the effects of the buffers on compleximetric titrations.